Skip to content

Highway windmill Project Report and Abstract

    Highway windmill Project Report and Abstract | Get Mechanical projects topic and ideas for study and research. we provide the widest list of Renewable Energy project Ideas to help students, researchers & engineers in their R&D. Also, we have a great variety of pre-made project kits using hydraulics, gears, and energy generation systems for you to use in your projects.

    ABSTRACT

    Renewable Energy Sources are those energy sources that are not destroyed when their energy is harnessed. Human use of renewable energy requires technologies that harness natural phenomena, such as sunlight, wind, waves, water flow, and biological processes such as anaerobic digestion, biological hydrogen production, and geothermal heat. Amongst the above-mentioned sources of energy, there has been a lot of development in the technology for harnessing energy from the wind.
     
     
    The wind is the motion of air masses produced by the irregular heating of the earth’s surface by the sun. These differences consequently create forces that push air masses around for balancing the global temperature or, on a much smaller scale, the temperature between land and sea or between mountains.
     
    Wind energy is not a constant source of energy. It varies continuously and gives energy in sudden bursts. About 50% of the entire energy is given out in just 15% of the operating time. Wind strengths vary and thus cannot guarantee continuous power. It is best used in the context of a system that has significant reserve capacity such as hydro, or reserve load, such as a desalination plant, to mitigate the economic effects of resource variability.
     

    INTRODUCTION

     
    The maximum value of CP according to the Betz limit is 59.3%. For good turbines, it is in the range of 35-45%. The tip speed ratio (A) for wind turbines is the ratio between the rotational speed of the tip of a blade and the actual velocity of the wind. High-efficiency 3-blade-turbines have tip speed ratios of 6-7.
     
    The total capacity of wind power on this earth that can be harnessed is about 72 TW. There are now many thousands of wind turbines operating in various parts of the world, with utility companies having a total capacity of 59,322 MW. The power generation by wind energy was about 94.1GW in 2007 which makes up nearly 1% of the total power generated in the world.
     
    Globally, the long-term technical potential of wind energy is believed to be 5 times current global energy consumption or 40 times current electricity demand. This would require covering 12.7% of all land area with wind turbines. This land would have to be covered with 6 large wind turbines per square kilometer.
     
    Some 80 percent of the global wind power market is now centered in just four countries—which reflects the failure of most other nations to adopt supportive renewable energy policies. Future market growth will depend in large measure on whether additional countries make way for renewable energy sources as they reform their electricity industries.

    HIGHWAY WINDMILL PROJECT REPORT AND ABSTRACT
     
     

    Overview

    India has a vast supply of renewable energy resources. India has one of the world’s largest programs for the deployment of renewable energy products and systems of 3,700 MW from renewable energy sources installed.

    WORK PRINCIPLE OF HIGHWAY WINDMILL

    The wind flows due to the moving automobiles are utilized by the wind turbine blade. This is a system in which the energy waste sources.  The wind power is converted into mechanical rotation.  Then this rotation is then converted into electrical power output.
    This electrical output is then stored in a battery or the generated power is directly connected to the grid.

    APPLICATIONS

    • Rural areas of the country where there is no electricity board.
    • Isolated areas like a forest.
    • High power grids can be connected.

    ADVANTAGES OF HIGHWAY WINDMILL

    •   And hence we achieved the following advantages over the conventional system  
    •  Clean source of energy.
    • Renewable source of energy.
    • Longer and maintenance-free life.                                      

    DISADVANTAGES OF HIGHWAY WINDMILL

    • Low response at low sunlight.
    • The initial cost is high.
    • It is an interrupted source of energy.

    Download Highway windmill Project Report

    This document is used for educational purpose only. We don’t own any copyrights for this document. If you want to remove this doc please contact us.

    Releted Project Topics

    Need any Project or any Help? Leave us a comment